Find out more about our product
Hardware
Hardware Information
Hardware info
- Two way operations from wall switch and application. Either can be used and reflects in application
- Works with Wall switch, External dimmer, Push button switch, Toggle switch and other setups
- 15-20 minutes standard installation time
- Live power graph, Hourly & Daily power consumption, Total switch usage times
- Smart Reset
- 3 years warranty
- Over the air smart update
- Buzzer to identify location and troubleshooting codes
- Watchdog (To recover software)
- Made in Australia
Device Technical information:
Device is compatible to max currents for each gang as per below:
Output: 240VAC 50/60Hz
Resistive Max: 10A
Inductive Max: 10A
Capacitive Max: 10A
Max standby power: <0.7W
Power measurement accuracy: + or – 3W
Dimensions: 89 x 70 x 26 mm
Accepted Input for L: 100 – 240VAC, 50/60Hz
External Switch Voltage Requirements:
L and N inputted with 100 – 240VAC, then the external switch also be powered by 100 – 240VAC to S1 or S2 connection.
Environment of Installation:
Must be installed indoors or weatherproof box in outdoor areas
Should be located in a dry location
Surface mount should be installed in a fire resistant plastic box.
Compatible wiring size for our connectors: 12AWG – 26AWG.
Notes:
- All the installation work must be performed by qualified electrician.
- Smart switch installs behind a lighting switch or a momentary push button switch. If switch needs installation in Roof or non-insulated environment. Electrician must use junction box. Switch must be installed as per standard Australian guidelines and requirements
Specifications can be modified without notice due to continuous improvement
